My Torn Radio Fu, D2, Project.
  • Introduction
  • Materials Required
    • Tools required
    • Replica resin faceplate
    • Replica resin faceplate & Control Knobs & Dials >
      • Dial's & Meter's construction >
        • Construction of Ma Meter
        • Construction of V Meter
        • Tuning dial construction
        • Constructing my Enigma Keys, & plugboard.
        • Fusprech f
        • Constructing the Battery Box for my Torn eb
        • " Abgesetzte Antenne " Remote Ariel for the Torn fu d2
        • My "Entertainment Radio"
      • Aerial input socket & tuning apparatus
      • Front connection panel for Communication's gear
      • Battery power inlet socket
      • power cable
      • 2B 39 Battery
      • External aerial & mounting
      • Sound Box
      • Accessory case's for Radio gear
      • Case for Sturmgewher 44
      • Transporting case for Aerial's
      • Micro switch mounting plate & built in audio source.
      • Morse code circuit.
      • "Radio case" & transporting Strap loops & Side loops,
      • Transporting straps
  • Internal make up of the "Radio"
  • Battery Box
  • Numbers, logos & dials
  • Failed designs
  • Technical " Maintenance " of Radio
  • Comment / Contact / or ask a Question
  • Where am i
  • My Communication's Post
  • Monitoring Receiver Fu.H.E.c.
  • Feldfu f
  • Building my Arriflex 35 mm Camera
  • News Reel
  • Fu.H.E.uL. Radio receiver, Direction Finder
I have two Torn Radio's with no Battery Boxe's.
Picture
To make the battery box i have constructed a former to help assemble the parts and keep them square. it is basically   the same setup as making the box for the Torn fu,d2,
Picture
Constructing the battery box side latches
Picture
follow sequence of construction of battery box latches from picture number one. 
Completed battery box.
Picture
Picture
Constructing the internal junction box  ( brown connector box on back internal wall of battery box )
Frame work for power supply unit.
making and fitting of trim to fit  front of Power supply unit.