Dial's & Meter's Construction Basic Model
if the detailed model is being constructed you have the No action is required for the removal of material
option of removing material from the rear of the meter from center of dial.
housing to accomodate a meter mechanism.
option of removing material from the rear of the meter from center of dial.
housing to accomodate a meter mechanism.
this material is carefully removed with the aid of a special bit ( available from d.i.y stores )
|
printed cut out dials are trimmed and iserted in to spaces provided on faceplate.
|
two aliminium angles cut and shaped to size to retain
plastic sheet for front of meter face front view of detailed meter construction
rear view of detailed meter construction
|
cut out graphic inserted in place in dial housing
The red pointer can be cut from a local Magazine which have some red print , mark a line at the back of the lens with a black marker,
|
Rear of face plate & fisheye lens showing "window frame" through which graduated dial is viewed,
Graduated tuning dial ( grey disc ) fitted to rear of fish eye lens and "window frame"