Material's  required for constructing  the internal parts of the Radio

Materials for constructing the "Radio" &  Battery box cabinet's
this consists of

Micrometer measurements are as follows,
from the left of the picture,

Brass rod / 3.99 mm.           the brass rod will fit 
Brass tube / 6.25 mm.         perfectly in to the brass tube
Brazing rod / 2.35 mm.        this is ideal for making
                                                                  bushing's to accomodate   
 Aluminium Sheet               shafts which will be going
                                                  through the front of the face
 varying from                        plate, 
                                                 e.g. for control knobs, or
 1. 27 / m.m.                       sockets for plug in earphones,   
  to                                                         Morse key.  
 3.09 / m.m.               
                                                                       
Depending on requirements.                                 
                                                                         

Materials from the left,

planed wood lats     25. X 15 m.m. Minimum,

wood

Aluminium strips 20. m.m. X length of sheet,

Electrical wire for connection of  internal  "Radio" components. 

This type of wire should be available from a D.I.Y Store or Electrical Shop.

It is approx 2.87 m.m. in Diameter and looks authentic period type wiring for the internal connections.

A light resin core Solder is also required to make internal Electrical connections

Examples of Soldering